Inventum Engineering Company Pvt. Ltd.

 
             
PRODUCTS
Induction Heater - Series HIB-01
Induction Heater - Series HIB-02
Mobile Hydraulic Press
Oil Injection Equipment
Hydraulic Bearing Extractor
Automated Hydraulic Bearing Extractor
 
 
 
 

Induction Heater - Series HIB-01
It is the 'light weight' member of Series HIB. It has power capacity of 3-3.5 kVA. The controls are based on solid state electronics. In HIB-01 the 2 operating modes, viz. Temperature mode and Time mode, are controlled through separate knobs on the Control Panel. These modes are connected in series,and heating cycle

Inquire Now...

 
Induction Heater-Series HIB-02
The 'middle-weight' from Series HIB, it has power capacity of 6-8 kVA. Its controls are microprocessor based. It weights about 47 kg. and can be easily carried to the site of operation, using special die-cast handle provides on both sides. It can heat a typical bearing of 13 kg. to 100°C in 3 minutes.
Inquire Now...
 
Mobile Hydraulic Press
INVENTUM Mobile Hydraulic Press Series-'HIPR-100/70' is a specially designed equipment for Mounting and Dismounting of Cartridge Type Taper Roller Bearing Units (CTRBUs) used in Rolling Stock of Indian Railways on Class ' E' Axle Journal (6'x11').This unit is a Jack Type (Horizontal) double acting Electric Hydraulic Puller cum installer having Inquire Now...
           
 
 
 
 
Oil Injection Equipment
The pressure required to dismount bearing assemblies generally is in the 200 to 500 kg/cm2range; and for torque-transmission joints is in the 800 to 1800 kg/cm2 range. It is only in exceptional cases that a pressure of 2500 kg/cm2is required.
Inquire Now...
 

Hydraulic Bearing Extractor
Hydraulic Bearing Extractor      INVENTUM developed a unique concept as Mobile Workstation to dismount direct mounted bearings without any damage or scoring to the bearing bore or shaft seating, with minimal force.This equipment is specially designed
Inquire Now...

 
Automated Hydraulic Bearing Extractor with Oil Injection System
The 'DWT MOT' Series Automated Hydraulic Bearing Extractor is a specially designed compact, mobile equipment for dismounting spherical roller bearings shrynk fitted (i.e. direct mounted) on cylindrical
Inquire Now...
 © Content Copyright Inventum Engineering Company Pvt. Ltd. All Rights Reserved
 © Design Copyright Indushub Global Publications, All Rights Reserved